- Island assembly consisting of 2 Heavy Duty Vacuum Pumps GVMAX HD Series with SMART SWAP quick-mounting system, right lateral pressure connection, max. vacuum 85 %, 2.5 mm nozzle dia., pulse-triggered bistable vacuum control and 24 V DC NC blow-off, 1 connector M12 8-pin, with standard blow-off.
ref. : GVMAXHD90X25LC18A1XG1F1DRB2R -
- characteristics
-
type of product (typp) venturi Nozzle diameter (Ø) 2.5mm Air drawn in (aa) 185Nl/min Generator Control (PG) Bistable/NC Connection (Cx) 1 x M12-8pin for islands mounting (Ilot) 2 modules Maximum vacuum (mv%) 85% Air consumed (ca) 294Nl/min Blow-off (S-SP) Standard models (mod) Right-hand pressure connection
- Dimensions
- Characteristics
- Pneumatic diagram
Model GVMAXHD__L: vacuum pump with pulse-triggered bistable vacuum control and NC blow-off (patented system)
In the event of power failure, the vacuum pump maintains its previous state.
More specifically, one of the following two scenarios will take place should the failure occur:
- During vacuum generation, the vacuum is maintained => fail-safe
- During blow-off or when the pump is off, the pump remains “Off”
Vacuum control is automatically stopped when the blow-off command is activated.
The vacuum can only be stopped with the blow-off command.
In the event of compressed air failure, the vacuum is no longer maintained.
• Pulse-triggered bistable vacuum control solenoid valve (50 ms
min.)
• NC blow-off control solenoid valve
• Blow-off controlled by external signal - Electrical connections
(1) 24 V DC suction command, depending on version:
- S: 24 V DC vacuum control
- V: 24 V DC vacuum off command
(2) DO2 configurable: - ASC status (default)
- or Pressure fault (below 5 bar or above 8 bar)
- or Power supply fault (below 21.6 V or above 26.4 V)
- or ASC fault
- or Object lost L: 24 V DC vacuum control with min. pulse-triggering of 50 ms - Blow-off
• Standard blow-off (version GVMAXHD…F1)
The blow-off flow is directed into the vacuum network and ensures the
object is released in most applications. -
3D Model
To generate the 3D file in the required format, we use the TRACEPARTS platform. To download the file, please use your TRACEPARTS username and password.